Hotpoint
Improper Freezing Pattern
Ice maker produces very thin sheets or flakes of ice instead of normal cubes.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Low water level in reservoir, Partially blocked water distribution tube, Scale buildup on evaporator, Incorrect cycle timing from control board
How to Fix / Troubleshooting
Safety: Unplug before cleaning internal components.
- Check water level: Ensure the reservoir fills to the correct mark. Adjust or repair the water level sensor if needed.
- Clean distribution tube: Remove and flush the water distribution tube or spray bar to clear mineral deposits.
- Descale evaporator: Use a descaling solution to clean the evaporator surface.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Distribution Tube
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements