IceKing ice maker is leaking water inside the bin, causing large ice clumps.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the unit before working inside the bin or ice-making area.
Step-by-step checks:
- 1. Observe water flow: During a cycle, watch how water flows over the evaporator. It should not spill directly into the bin.
- 2. Align distribution tube: Adjust the water distribution tube or spray bar so water evenly covers the evaporator and does not drip off the sides.
- 3. Inspect trough: Check the water trough or channel for cracks or warping. Replace if damaged.
- 4. Adjust ice thickness: If ice slabs are too thick and break into large chunks, adjust the thickness sensor to reduce thickness.
When to call a technician: If parts are warped from heat or age, or if you cannot access the distribution system, a technician should service the unit.
Repair Difficulty
Required Part
We may earn a commission from links on this page.