Iceman
External Water Leak
Ice maker is leaking water onto the floor from underneath
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or cracked drain hose, Leaking water inlet valve body, Cracked reservoir or sump, Loose hose clamp on circulation pump
How to Fix / Troubleshooting
Safety: Unplug the unit and shut off water immediately to prevent damage.
- 1. Remove panels: Take off the lower front or side panels to locate the source of the leak while the reservoir is filled.
- 2. Inspect hoses and clamps: Check all visible hoses for cracks and ensure clamps are tight. Replace any brittle or damaged tubing.
- 3. Examine reservoir and sump: Look for hairline cracks or seams leaking around the water reservoir. Replace the reservoir if damaged.
- 4. Check inlet valve and pump: Inspect around the water inlet valve and circulation pump for drips from the body or fittings. Replace the leaking component.
- 5. Test after repair: Restore water and run a cycle while observing for leaks before reinstalling panels.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drain Hose / Reservoir / Water Inlet Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements