Ice maker does not power on at all; no lights or display when plugged in.

Safety first: Disconnect the ice maker from the outlet before opening any panels. If you suspect a short or burning smell, do not attempt repair beyond basic checks.

• Verify outlet: Plug another appliance or a lamp into the same outlet to confirm it has power. Reset any tripped GFCI or breaker.
• Inspect power cord: Check the Igloo power cord for cuts, kinks, or burn marks. If damaged, the cord must be replaced.
• Check power switch: Ensure the power button or rocker switch is in the ON position and not physically broken.
• Access control board: Remove the rear or bottom panel to access the PCB. Look for an onboard fuse (often a small glass or ceramic fuse). If visibly blown, replace with the same rating only if you are qualified.
• Board inspection: Look for burnt components or discoloration on the PCB. If present, the board should be replaced rather than repaired at home.
• Replace control board or cord: If the fuse is good but there is still no power, replace the main control board or power cord assembly with Igloo-approved parts.