Insignia LED Power or Connection Issue

Ice maker’s bin light or indicator LEDs flicker or are very dim.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose LED harness, Failing LED module, Weak power supply on control board, Corroded connector

How to Fix / Troubleshooting

Safety first: Unplug the unit before accessing the control panel or LED modules.

  • Check power stability: Plug the unit directly into a wall outlet, not a loose power strip.
  • Inspect LED wiring: Remove the top/front panel and locate the LED harness. Ensure connectors are fully seated and free of corrosion.
  • Test with movement: Gently wiggle the harness while the unit is on (use caution) to see if flickering changes, indicating a bad connection.
  • Replace LED module: If only one LED or group is dim or out, replace the corresponding LED light module.
  • Control board issue: If all LEDs are dim and power is good, the control board’s LED driver may be failing and the board may need replacement.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

LED Light Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements