Liebherr
External Leak from Ice Maker Water Circuit
Liebherr ice maker causes water to appear on the floor in front of the appliance
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose compression fitting on water line, Cracked plastic water line to Liebherr unit, Leaking water inlet valve body, Condensation misdiagnosed as leak
How to Fix / Troubleshooting
Safety first: Immediately close the water shutoff valve and unplug the appliance if you see water on the floor.
- Inspect rear connections: Pull the appliance forward carefully and check the water line connection at the back for drips.
- Check tubing: Run your hand along the water line from the shutoff valve to the appliance to feel for moisture or cracks.
- Tighten fittings: Gently tighten compression nuts, but do not overtighten plastic fittings.
- Dry and test: Dry all areas, restore water, and observe for leaks during a fill cycle. Replace any cracked tubing or a leaking valve.
- Rule out condensation: Ensure the floor is level and that no defrost water is overflowing from internal drains.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Liebherr Water Supply Line
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements