Maytag Display / LED Failure

Display is dim, flickering, or partially missing segments

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging display module, loose display connector, failing UI board, low supply voltage from main board

Safety first: Disconnect power before accessing the display.

Check connections: Remove the control panel and reseat the display connector.
Inspect for damage: Look for burnt components or corrosion on the UI board.
Test voltage: With care and proper tools, verify the main board is supplying correct low-voltage power to the UI (per service manual).
Replace UI board: If the display remains dim or incomplete, replace the user interface board or display module.

Medium 3/5

User Interface Board / Display Module

Check Price on Amazon

We may earn a commission from links on this page.