Ice maker produces ice very slowly compared to normal

Safety: Unplug the unit before cleaning or removing panels.

• Clean condenser: Use a soft brush and vacuum to remove dust from the condenser coils at the back or bottom of the unit.
• Check ventilation: Ensure there is adequate clearance around the ice maker per the installation manual. Do not enclose it tightly in a cabinet without ventilation.
• Verify fan operation: After reassembling and powering on, confirm the condenser fan runs whenever the compressor is on.
• Descale water system: Run a cleaning cycle with a manufacturer-approved descaler to remove mineral buildup that can insulate the evaporator.
• Call a technician if unresolved: If production remains low after cleaning and airflow improvements, a sealed system issue may exist and requires professional service.