E14 displayed; unit may run but produce no ice or very little ice.

Safety First: Turn off power at the breaker before accessing the compressor compartment. High voltage is present.

• Listen for compressor: When the unit calls for cooling, listen for the compressor starting. Clicking followed by silence often indicates a start device issue.
• Inspect start components: Remove the rear or side access panel to reach the compressor. Carefully remove the start relay and overload from the compressor terminals and inspect for burns or rattling parts.
• Replace start device: If the relay or overload shows signs of failure, replace the compressor start relay and overload with the correct Monogram parts.
• Compressor test: If new start components do not resolve E14 and the compressor still will not run or draws locked-rotor current, the compressor itself may be failed and will require professional replacement.