Monogram
No Ice Production
Ice maker runs but produces no ice at all.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water supply turned off, failed water inlet valve, clogged water filter or inlet screen, sealed system failure (compressor or refrigerant leak)
How to Fix / Troubleshooting
Safety First: Turn off water and power before disconnecting any water lines or panels.
- Confirm water supply: Ensure the shutoff valve is fully open and the supply line is not kinked.
- Check for water in sump: Remove the bin and observe whether water is present in the reservoir during operation. No water indicates a fill issue.
- Test inlet valve: If water supply is good but the sump stays dry, test and replace the water inlet valve as needed.
- Check evaporator frost: If water is present but no ice forms on the evaporator, the refrigeration system may be at fault. This requires a licensed technician to diagnose compressor and refrigerant issues.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Water Inlet Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements