E08 displayed, ice maker compartment too warm, ice output very low
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety: Disconnect power before cleaning or working near moving fans.
Steps:
- Check ventilation: Ensure the cabinet has the clearances specified by Neff and that front/rear grills are not blocked by cabinets or objects.
- Clean condenser: Use a soft brush or vacuum to remove dust from the condenser coil and surrounding area.
- Inspect fan: Locate the condenser fan near the compressor. Check that the blade spins freely by hand and is not obstructed.
- Test fan motor: Restore power briefly and observe if the fan runs when the compressor is on. If not, test motor windings for continuity with power off.
Resolution: Replace the condenser fan motor if it does not run or has open windings. Persistent E08 after cleaning and fan replacement may indicate a deeper cooling system issue requiring a technician.
Repair Difficulty
Required Part
We may earn a commission from links on this page.