F1
Princess
Fan Motor Error
Display shows F1; unit may start but quickly stops; fan and compressor behavior may be abnormal.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Fan blades obstructed by debris, Loose fan connector on PCB, Seized fan bearings
How to Fix / Troubleshooting
Safety: Unplug the ice maker before accessing the fan area. Beware of sharp metal edges.
Steps:
- 1. Inspect fan area: Remove the rear panel to access the condenser fan. Check for dust buildup, plastic wrapping, or wires touching the blades.
- 2. Clean and free blades: Carefully remove any obstruction and clean the blades with a soft brush.
- 3. Spin test: Rotate the fan by hand; it should spin freely without grinding. If stiff or noisy, the motor is likely failing.
- 4. Check wiring: Ensure the fan motor connector is firmly plugged into the main PCB and wires are not damaged.
- 5. Replace motor: If the fan does not run when the compressor is on, replace the condenser fan motor with a compatible Princess part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements