Pro Breeze
Condenser Fan Non-Operation
Condenser fan does not spin, but compressor becomes very hot.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Obstruction preventing fan rotation, Disconnected fan wiring, Faulty fan driver on control board
How to Fix / Troubleshooting
Safety first: Unplug the unit before touching the fan or wiring.
- Step 1 – Check for obstructions: Remove the rear panel and clear any debris blocking the fan blades.
- Step 2 – Spin test: Turn the fan by hand. If it is stiff or seized, the motor is likely bad.
- Step 3 – Verify wiring: Ensure the fan connector is fully seated on the main board.
- Step 4 – Replace fan motor: Install a new Pro Breeze condenser fan motor if the old one is seized or electrically open.
- Step 5 – Control board: If a known-good fan does not receive power, the main board may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements