Salter Fan Motor Failure Without Error

Condenser fan does not run but compressor is hot and running

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Seized fan motor, Broken fan blades, Disconnected fan wiring, Obstruction preventing fan rotation

How to Fix / Troubleshooting

Safety: Unplug before touching the fan.

Check for obstructions: Look through the vent and remove any debris blocking the fan.
Spin test: Gently try to spin the fan blades by hand. If they are stiff or jammed, the motor may be seized.
Check connector (advanced): Remove the rear panel and ensure the fan connector is firmly attached to the PCB.
Monitor temperature: Do not run the unit for long with a non-functioning fan, as this can overheat the compressor.

A non-spinning fan with power applied indicates the fan motor should be replaced.

Repair Difficulty

Medium 3/5

Required Part

Condenser Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.