Ice maker not operating; diagnostic shows 8E indicating ice room fan or sensor error on Samsung French door models with ice room in the refrigerator compartment.

Safety first: Unplug the refrigerator before removing any covers or fans.

Steps:

• Access ice room: Remove the ice bucket and the ice room cover. On many Samsung models, this involves removing a few screws and releasing plastic clips.
• Inspect fan area: Locate the ice room fan motor behind the cover. Check for heavy frost or ice buildup around the fan blades. If present, the fan may be blocked.
• Defrost ice room: Use a hair dryer on low or a portable fan with doors open to melt ice around the fan. Do not concentrate heat in one spot or use sharp tools. Place towels to catch water.
• Check fan operation: After defrosting, reconnect power briefly and close the door switch manually to simulate door closed. Listen for the fan running. If the fan does not run or is noisy, replace the ice room fan motor assembly.
• Inspect wiring: With power off again, check the wiring harness and connectors to the fan and sensor. Reseat connectors and look for corrosion or damage.

If the 8E error returns, the fan motor or sensor (often part of the same harness) may need replacement.