Samsung
Insufficient Water Fill to Ice Maker
Ice maker is making ice but cubes are very small or hollow.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Low household water pressure, Partially clogged water filter, Restricted water inlet valve screen, Frozen or partially blocked fill tube
How to Fix / Troubleshooting
Safety first: Turn off water supply and unplug the refrigerator before disconnecting any water lines.
Steps:
- Check water pressure: Dispense water from the door. If the stream is weak, correct plumbing issues or consult a plumber. Samsung ice makers need at least 20 psi.
- Replace water filter: Install a new Samsung filter if the current one is old or suspected clogged.
- Inspect inlet valve and line: Access the rear of the refrigerator and remove the lower panel. Check the water inlet valve and line for kinks or mineral buildup. Replace the valve if screens are clogged or flow is restricted.
- Check fill tube for ice: Inside the freezer, inspect the fill tube above the ice maker. If iced over, gently thaw with a hair dryer on low, keeping it moving to avoid melting plastic.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Refrigerator Water Inlet Valve Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements