Scotsman No Water Fill

Unit does not fill with water, but has power

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Closed water supply valve, clogged inlet screen, failed water inlet valve coil, low water pressure, water level sensor stuck in full position

Safety: Turn off power and close the water supply before disconnecting lines.

Verify water supply: Ensure the shutoff valve is open and water flows when the line is disconnected into a bucket.
Clean inlet screen: Remove the inlet line from the valve and clean the screen of sediment.
Test valve coil: A technician can check for proper voltage at the valve during fill and measure coil resistance. Replace the valve if it does not open.
Check water level sensor: Clean the probe or float so it does not falsely indicate a full reservoir.

Medium 3/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.