Scotsman
Bin Control Failure
Unit runs continuously and does not shut off even when bin is full
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bin thermostat stuck open, bin switch failed, bin sensor out of position, control board ignoring bin input
How to Fix / Troubleshooting
Safety: Disconnect power before working in the bin area.
- Check bin sensor: Verify the bin thermostat bulb or sensor is correctly positioned at the proper ice level and not hanging too high.
- Test thermostat/switch: Use a multimeter to check continuity. The bin control should close when cold/full and open when warm/empty (or vice versa depending on design). Replace if it does not change state.
- Inspect wiring: Ensure the bin control wiring is intact and connected to the control board.
- Control board: If the bin control tests good, the control board may not be responding to the bin signal and may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Bin Thermostat
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements