Silonn Display Module / LED Segment Failure

Display is blank or segments are missing, but the unit still runs.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Loose display connector, Failed LED display module, Faulty UI board driver circuit, Cracked display PCB

How to Fix / Troubleshooting

Safety first: Unplug the ice maker before accessing the display.

Steps to fix display issues:

  • Access display: Remove the front/top panel to reach the display module.
  • Check connections: Ensure the display cable is firmly connected to the user interface or main board.
  • Inspect for damage: Look for cracks or burn marks on the display PCB.
  • Replace display: If segments are permanently missing or the display is blank despite good connections, replace the LED display module or entire UI board, depending on design.

When to call a professional: If you cannot separate the display from the control panel, the whole assembly may need replacement by a technician.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

LED Display Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements