Display flashes ICE or ice-full icon; unit stops making ice even though bin is not full.

Safety: Unplug the ice maker before reaching into the ice bin or chute.

Steps:

• Clear ice jams: Remove the ice bin and check for clumped ice blocking the sensor or mechanical arm. Break up and discard any fused cubes.
• Clean sensor/arm: Wipe the ice level sensor window or mechanical arm with a warm, damp cloth to remove frost and residue.
• Check arm movement: If your SMAD model uses a mechanical bin arm, move it up and down by hand. It should move freely and return by spring tension. If it sticks, inspect for bent parts or ice buildup.
• Test operation: Reinstall the bin, restore power, and observe whether the unit resumes ice production. If the ICE indication returns immediately, the ice level switch or sensor may need replacement.