SMAD
No Power / Electrical Supply Failure
Ice maker will not power on at all; no lights or display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker, faulty power cord, blown internal fuse, failed main control board power supply section
How to Fix / Troubleshooting
Safety: Disconnect the unit from power before inspecting the cord or internal components.
Steps:
- Check outlet: Plug another appliance into the same outlet to verify power. Reset any tripped breakers or GFCI outlets.
- Inspect power cord: Examine the SMAD ice maker's power cord for cuts, burns, or kinks. Replace the power cord if damaged.
- Internal fuse: Remove the rear or bottom panel and look for an inline fuse or board-mounted fuse. Test with a multimeter and replace with the same rating if blown.
- Control board: If power reaches the board but there is still no display, the main control board may be defective and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Power Cord / Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements