Ice maker displays EC08 or service code 08 and indicates a door or bin switch error.

Safety: Disconnect power before working around switches and wiring.

Steps to address EC08:

• 1. Inspect bin door alignment: Ensure the ice bin door closes fully and evenly. Adjust hinges or mounting screws if the door is sagging or misaligned.
• 2. Locate the door switch: The switch is typically mounted near the bin opening and actuated by the door or a lever.
• 3. Test switch operation: With power off, remove the switch from its mounting and test continuity with a multimeter while pressing and releasing the actuator. Replace the switch if it does not change state reliably.
• 4. Check wiring: Inspect the harness for breaks, especially where it passes through the cabinet. Repair or replace damaged wiring.
• 5. Control board: If a known-good switch and wiring still result in EC08, the control board input may be faulty and require professional service.