Display shows E10, unit may not respond to button presses or cycles erratically.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety: Unplug the ice maker before removing the control panel or top cover.
Connection checks:
- Access the control panel: Remove screws securing the front display or top console on your Summit ice maker.
- Inspect ribbon cable: Ensure the flat ribbon cable or harness between the user interface and main control board is fully seated and not damaged.
- Dry moisture: If there are signs of condensation or water inside the panel, gently dry the area with a lint-free cloth and allow several hours of air drying before reassembly.
Component replacement:
- If buttons do not respond and E10 persists, replace the user interface / control panel board.
- If a new panel does not resolve the issue, the main control board is likely faulty and should be replaced.
Tip: Avoid spraying cleaners directly on the control panel; spray onto a cloth instead to prevent future moisture damage.
Repair Difficulty
Required Part
We may earn a commission from links on this page.