Weasy
Harvest / Ejection Failure
Ice bin remains empty; unit runs but no ice is delivered to the bin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Ice slab not releasing from evaporator, Broken or jammed ice sweep arm, Failed harvest motor, Insufficient hot gas or harvest heat
How to Fix / Troubleshooting
Safety first: Unplug the ice maker and allow any stuck ice to melt; avoid prying with metal tools.
- Inspect evaporator: Look for ice stuck to the plate or grid. Heavy scale can prevent release; descale with approved cleaner.
- Check sweep arm or grid: Ensure the mechanical arm or grid can move freely and is not obstructed.
- Observe harvest cycle: With panels off (and using caution), watch a cycle to see if the harvest motor turns. Replace the motor if it does not run and tests open.
- Descale and clean: Remove mineral buildup that can glue ice to the evaporator.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Harvest Motor Assembly (Weasy Ice Maker)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements