Weasy
Excessive Ice Thickness / Harvest Control Issue
Ice cubes are oversized, fused together, or form a solid slab that jams the bin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Misadjusted ice thickness sensor, Scale insulating thickness probe, Sticking water inlet valve, Faulty harvest timing on control board
How to Fix / Troubleshooting
Safety first: Unplug the ice maker and allow thick ice slabs to melt; do not pry with sharp tools.
- Clean thickness probe: Remove mineral buildup with warm vinegar and a soft cloth.
- Adjust thickness setting: If your Weasy model has a thickness adjustment screw or menu setting, reduce the thickness slightly.
- Check water shutoff: Observe a cycle to ensure the water inlet valve closes fully and does not continue dripping onto the evaporator.
- If water continues to flow after fill, replace the water inlet valve. If thickness remains excessive despite adjustments, suspect a control board harvest timing fault.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Thickness Sensor / Probe (Weasy)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements