Amica Display Module or Control PCB Fault

Microwave display is dim, flickering, or some segments are missing.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LED/VFD display, Poor solder joints on display pins, Failing display driver IC, Low-voltage supply instability

Safety: Unplug before accessing the control panel.

Check power supply: If the entire display is dim, the low-voltage supply may be weak. Inspect capacitors on the control PCB for bulging.
Tap test: Gently tap the control panel; if the display flickers, suspect loose connections or cracked solder joints.
Reseat connectors: Reseat the display module connector on the control board.
Replace module: If segments are permanently missing, replace the display module or entire control PCB as per Amica parts availability.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.