Beko
Door Hinge / Alignment Fault
Microwave door does not close properly; it feels loose or misaligned and may not start.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose door hinge screws,Bent hinge,Deformed door frame,Worn door bushings
How to Fix / Troubleshooting
Safety first: Unplug the microwave before adjusting hinges.
- 1. Inspect hinges: Open the door and check hinge screws on both the door and cabinet. Tighten any loose screws.
- 2. Check alignment: Close the door and look for uneven gaps. If the door sags, the hinge may be bent.
- 3. Adjust or replace hinge: If possible, adjust the hinge position slightly. If bent or damaged, replace the hinge with a Beko-approved part.
- 4. Verify interlock operation: After adjustment, ensure the microwave starts only when the door is fully closed.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements