E09
Blomberg
Low Line Voltage or Power Supply Error
Microwave shows E09 and beeps; interior light may flash briefly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Low household voltage,Loose power cord connection,Defective internal power supply on control board,Tripped internal line fuse
How to Fix / Troubleshooting
Safety: Unplug the microwave before inspecting the cord or internal fuses.
User checks:
- 1. Test outlet: Plug another high-wattage appliance (like a kettle) into the same outlet to confirm it delivers full power. If lights dim or the appliance struggles, have an electrician check the circuit.
- 2. Avoid extension cords: Plug the Blomberg microwave directly into a dedicated wall outlet. Undersized extension cords can cause voltage drop and trigger E09.
- 3. Inspect power cord: Check the cord for cuts, kinks, or burn marks. If damaged, do not use the microwave until the cord is replaced.
Advanced checks:
- 4. Internal fuse: With the unit unplugged, remove the outer cabinet and locate the line fuse. If blown, determine and correct the cause (shorted component, surge) before replacing with the exact same rating.
- 5. Power supply section: Inspect the control board's power supply components (transformer, rectifier, regulators) for damage. Board-level repair or replacement may be required.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements