Clatronic Convection Heater or Fan Failure

Microwave convection mode (if equipped) does not heat, but standard microwave mode works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open convection heating element, Failed convection fan motor, Faulty convection thermostat, Damaged wiring to convection assembly

Safety first: Unplug and allow the unit to cool before inspection.

Steps:

Confirm mode: Ensure you have correctly selected convection mode and set a temperature, not just microwave power.
Preheat test: Start a preheat cycle and check if hot air is produced after several minutes. If not, the convection heater or fan may be faulty.
Technician checks: With the cabinet removed (unplugged), test the convection element and fan motor for continuity and inspect wiring and thermostats.

Hard 4/5

Convection Heating Element

Check Price on Amazon

We may earn a commission from links on this page.