F1
Emerson Control Board Internal Fault

Microwave displays F1 and may beep continuously; unit may not respond to keypad inputs.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed microcontroller on control board, Corrupted firmware, Shorted component on PCB, Power surge damage

How to Fix / Troubleshooting

Safety first: Unplug the microwave before opening the control area.

Reset attempt:

  • Unplug the unit for 10–15 minutes to fully discharge and reset the control.
  • Plug back in and see if F1 reappears. If it does, proceed to inspection.

Control board inspection:

  • Remove the control panel and visually inspect the PCB for burnt components, cracked solder joints, or corrosion.
  • Ensure all connectors are firmly seated.

Resolution: If no external cause is found and F1 persists, the control board must be replaced. Match the Emerson model and part number exactly. If you are not comfortable transferring wiring and mounting the new board, contact a technician.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements