Fagor
Turntable Drive Failure
Microwave turntable does not rotate, but heating still occurs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken turntable coupler, Worn or seized turntable motor, Damaged roller ring, Stripped motor shaft
How to Fix / Troubleshooting
Safety: Unplug before handling internal parts.
User checks:
- Remove the glass tray and roller ring; clean both thoroughly.
- Inspect the center coupler for cracks or melting.
- Reinstall and test; if still not rotating, proceed.
Motor replacement (intermediate):
- Access the underside of the cavity (bottom panel) to reach the motor.
- Disconnect the motor wires and remove mounting screws.
- Install a new Fagor-compatible turntable motor and reassemble.
Do not force the tray; if it binds, check for deformed cavity floor or misaligned coupler.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Turntable Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements