E7
Gorenje
Door Sensing / Monitor Circuit Error
Microwave displays E7 and will not start; sometimes accompanied by interior light flickering.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect state of monitor switch,Shorted or welded door switch contacts,Loose door switch bracket,Faulty wiring in door interlock circuit
How to Fix / Troubleshooting
Safety warning: Door interlock circuits are a critical safety system. Unplug the unit before any work.
- Check door alignment: Inspect the door hinges and ensure the door closes flush with the cabinet. Adjust if visibly sagging.
- Inspect latch hooks: Look for bent or broken door hooks that may not fully actuate the switches.
- Internal check (qualified persons): Remove the cover and inspect the door switch bracket. Ensure it is firmly attached and not bent.
- Test switches: Using a multimeter, verify that the primary, secondary, and monitor switches change state correctly when the door is opened and closed. Replace any switch with welded or inconsistent contacts.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Door Switch Set (Primary/Secondary/Monitor)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements