E9
Gorenje
Grill Heater Circuit Fault
Microwave displays E9 and grill function will not start (on grill/combination models).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open grill heating element,Burnt grill wiring or connectors,Failed grill relay on control PCB,Tripped grill thermal cut-out
How to Fix / Troubleshooting
Safety: Disconnect power and allow the grill area to cool before inspection.
- Visual inspection: Look at the grill element inside the cavity for visible breaks, blisters, or burn marks.
- Check thermal cut-out: Some models have a thermal fuse or thermostat mounted near the grill element. Inspect for signs of overheating or open circuit (multimeter test, qualified persons).
- Continuity test: With the unit unplugged and top cover removed, disconnect the grill element terminals and measure resistance. Infinite resistance indicates a failed element that must be replaced.
- Inspect wiring: Check for loose or burnt connectors between the grill element and control board. Repair or replace as needed.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Grill Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements