Gorenje Door Alignment / Hinge Wear

Microwave door does not close properly or sags; cooking may stop when door is touched.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or bent door hinges,Loose hinge screws,Deformed door frame,Door seal interference

Safety: Unplug before adjusting hinges.

Check for sag: Observe the gap around the door. If it is wider at the top or bottom, hinges may be loose or bent.
Tighten screws: Access the hinge mounting screws (often behind the outer cover or trim) and tighten them carefully.
Inspect hinges: If hinges are visibly bent or worn, replace them with Gorenje-compatible hinge parts.
Seal check: Ensure the door gasket is seated correctly and not folded or damaged.

Medium 3/5

Door Hinge Set

Check Price on Amazon

We may earn a commission from links on this page.