Hansa
Door Alignment / Hinge or Latch Wear
Microwave door does not close properly or pops open during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn door hinges, Weak door latch spring, Deformed door frame, Loose hinge screws
How to Fix / Troubleshooting
Safety first: Unplug the microwave before adjusting hinges or latches.
- Inspect hinges: Open the door and check for play or sagging. Tighten any accessible hinge screws on the cabinet and door.
- Check latch engagement: Close the door slowly and observe how the latch hooks engage. They should click firmly into place.
- Look for obstructions: Ensure no utensils, foil, or debris are caught in the door seal area.
- Test operation: After adjustments, run a short cycle and watch for any movement of the door. If it still pops open, the latch or hinges may need replacement.
Warning: Do not operate the microwave if the door cannot be securely closed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Hinge Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements