Ikea Convection Airflow or Temperature Regulation Issue

Built-in IKEA microwave/oven combo shows uneven baking or convection results; hot spots or undercooked areas.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Convection fan not running at full speed, Blocked air channels, Faulty cavity temperature sensor, Incorrect rack or tray placement

How to Fix / Troubleshooting

Safety: Allow the unit to cool before accessing the fan or sensor.

Steps:

  • 1. Use correct accessories: Follow the IKEA manual for rack and tray positions in convection mode.
  • 2. Preheat properly: Allow the unit to reach the set temperature before placing food inside.
  • 3. Check fan operation: During convection mode, listen for the fan. If it is weak or intermittent, it may be failing.
  • 4. Clean air channels: Remove any panels or covers (as per manual) and vacuum dust and grease from air passages.

Resolution: Replace the convection fan motor or cavity temperature sensor with IKEA-compatible parts if airflow or temperature control is faulty.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Convection Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements