E10
Ikea Grill Heater Circuit Fault

Microwave shows E10 and the grill function does not work, while normal microwave heating may still operate.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Open grill heating element, Faulty grill thermostat or thermal cut-out, Burned wiring to grill element, Defective grill relay on control board

How to Fix / Troubleshooting

Safety: Unplug the microwave and allow the grill element to cool completely before inspection.

Steps:

  • 1. Visual inspection: Look at the grill element (usually at the top of the cavity). Check for visible breaks, blisters, or burn spots.
  • 2. Test grill-only mode: Run a short grill cycle. If the element does not glow red after a few minutes and E10 appears, the grill circuit is likely faulty.
  • 3. Access element connections (DIYers): Remove the outer cover and locate the terminals of the grill element. Check for loose or burned connectors.
  • 4. Continuity test: With a multimeter, test the grill element for continuity. An open reading indicates a failed element.

Resolution: Replace the grill heating element or associated thermostat/thermal cut-out with the correct IKEA-compatible part. If the element tests good, the control board relay may need replacement.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Grill Heating Element
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements