Insignia
Display Module or Control Board Backlight Failure
Microwave display is dim, flickering, or partially unreadable, but cooking still works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED/VFD display,Loose display connector,Failed display driver on control board,Power supply issue to display circuit
How to Fix / Troubleshooting
Safety Warning: Unplug the microwave before removing the control panel.
Steps:
- Unplug the unit for 5 minutes, then plug back in to see if the display resets.
- If the display remains dim or segments are missing, the display module or control board is likely failing.
Technician-level:
- Remove the control panel and reseat the display connector.
- If no improvement, replace the main control board or display module (depending on model design).
The microwave can often still be used if you can safely operate it, but replacement of the control is the long-term fix.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements