F7

Maytag Stuck Function or Keypad Matrix Error

Microwave displays F7 and may not respond to keypad inputs or may start/stop unexpectedly.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted keypad matrix, Contaminated keypad contacts, Faulty user interface board, Control board input circuit failure

How to Fix / Troubleshooting

Safety first: Unplug the microwave before removing any panels.

Initial steps:

Unplug for 5–10 minutes to clear the code.
Plug back in and observe whether F7 appears without pressing any buttons. If so, a key is likely stuck or the keypad matrix is shorted.

Keypad inspection:

Clean the keypad surface with a soft, slightly damp cloth. Avoid excessive moisture.
Remove the control panel to access the keypad ribbon cable. Inspect for damage or corrosion and reseat the connector.

Functional test:

With the panel reinstalled and power restored, test each keypad function.
If certain keys do not respond or trigger F7, the keypad or user interface board is defective.

Corrective action:

Replace the membrane keypad or user interface control panel assembly as specified for your model.
If a new keypad does not resolve F7, the main control board may also need replacement.

Repair Difficulty

Medium 3/5

Required Part

User Interface Control Panel

Check Price on Amazon

We may earn a commission from links on this page.