Neff Convection Heating Failure

Microwave convection (hot air) mode does not heat, but microwave-only mode works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open convection element, Failed convection fan, Faulty convection thermostat, Control board not energizing convection relay

Safety: Unplug and allow to cool before inspection.

User confirmation:

Run a convection-only program and check if hot air is produced after several minutes.

Technical checks:

Access and test the convection element and fan for continuity and free movement.
Replace any open element or seized fan motor.

If elements and fan are good, the control board may be at fault and require replacement.

Hard 4/5

Convection Heating Element

Check Price on Amazon

We may earn a commission from links on this page.