Paderno
Display Backlight / VFD Aging
Microwave display is on but very dim or flickers; cooking still works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aged VFD tube, Weak display power supply, Loose display connector, Failing display driver components
How to Fix / Troubleshooting
Safety first: Unplug the microwave before accessing the control panel.
Step-by-step checks:
- 1. Check brightness setting: Some models allow dimming; verify it is not set to low/night mode.
- 2. Reseat connectors: Remove the control panel and reseat the display connector.
- 3. Inspect board: Look for heat discoloration near the display driver components.
- 4. Replace module: If the display remains dim, replace the display module or entire control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements