Paderno Intermittent Power Interruption

Microwave stops mid-cycle and resets or loses time; display may blink or go blank briefly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose power cord connection, Failing internal fuse holder, Cracked solder joints on control board, Overheating causing thermal cutout

Safety first: Unplug the microwave before inspection.

Step-by-step checks:

1. Check cord and outlet: Ensure the plug fits snugly and the outlet is not loose.
2. Inspect cord strain relief: Look where the cord enters the microwave for signs of movement or damage.
3. Internal inspection: Remove the cover and gently wiggle connectors to the control board and fuse holder, looking for intermittent connections.
4. Overheat check: If the unit stops after long use, a thermostat may be opening due to overheating; ensure vents are clear.

Medium 3/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.