E18
Privileg
Weight / Load Sensor Error (Built-in Scale or Load Detection)
Microwave displays E18 and may not respond to sensor cooking or auto programs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty weight sensor (load cell),Loose mounting of turntable support,Disconnected sensor harness,Control PCB ADC failure
How to Fix / Troubleshooting
Safety first: Unplug the microwave before internal inspection.
User-level checks:
- 1. Remove extra accessories: Ensure only the glass tray and roller ring are in place. Remove metal racks or accessories that may interfere with weight detection.
- 2. Clean the turntable area: Food debris under the roller ring or coupler can affect load readings. Clean thoroughly.
Technician-level checks:
- Access the underside of the cavity and locate any load cell or weight sensor assembly.
- Verify that the sensor is firmly mounted and not bent or damaged.
- Check the harness from the sensor to the control board for continuity.
- Replace the weight sensor if readings are out of specification.
Note: Many Privileg microwaves do not use a weight sensor; E18 will only apply to models with auto-weight functions.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Weight Sensor / Load Cell
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements