Privileg Display Module / VFD or LED Failure

Microwave display is dim, flickering, or segments are missing, but cooking still works.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Aging VFD display,Loose display connector,Failed display driver on control PCB,Low supply voltage to display

How to Fix / Troubleshooting

Safety first: Unplug the microwave before accessing the control panel.

Step-by-step checks:

  • 1. Check brightness settings: Some models allow dimming; verify the display is not set to low brightness.
  • 2. Access control panel: Remove the panel and inspect the display connector. Reseat it firmly.
  • 3. Inspect for heat damage: Look for discoloration or heat damage around the display area.
  • 4. Replace display or control board: If the display remains dim or incomplete, replace the display module or the entire control PCB, depending on how Privileg supplies the part.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Display Module / Control PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements