Salter No Power / Dead Appliance

Microwave does not start at all; display is blank and no lights or sounds when plugging in.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal mains fuse, Faulty power cord, Failed control PCB power supply, Faulty door interlock preventing power-up on some models

How to Fix / Troubleshooting

Safety: Ensure the microwave is unplugged before any inspection. Do not bypass fuses or safety devices.

Steps:

  • 1. Check outlet: Test the wall socket with another appliance to confirm it has power.
  • 2. Check plug and cord: Inspect the Salter microwave's plug and power cord for cuts, burns, or kinks. Do not use the unit if the cord is damaged; have it replaced.
  • 3. Reset breaker: Check your consumer unit/fuse box for a tripped breaker or blown fuse and reset/replace if necessary.
  • 4. Internal fuse (technician): If the outlet is live but the microwave is dead, a technician can open the cabinet and test/replace the internal mains fuse and check for underlying faults (shorted components).

If the internal fuse blows again immediately after replacement, a deeper electrical fault exists and must be professionally repaired.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Internal Mains Fuse
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements