Summit Door Latch and Hinge Misalignment

Microwave door will not close or pops open during operation

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent door hinges, Worn latch hooks, Misaligned cabinet frame, Obstruction on door seal

Safety: Unplug the microwave before adjusting door components.

Steps:

Inspect the door gasket and front frame for food debris or buildup; clean thoroughly.
Check the door hinges for bending or looseness; tighten hinge screws if accessible.
Examine the latch hooks for wear or damage; replace if cracked or rounded.
Ensure the microwave is installed level; adjust mounting if over-the-range.

If the door still will not stay closed, the door assembly or cabinet frame may be warped and require professional replacement.

Medium 3/5

Door Hinge and Latch Assembly

Check Price on Amazon

We may earn a commission from links on this page.