Swan Grill Heating Circuit Failure

Grill function does not heat, but microwave function works normally.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open grill heating element, Faulty grill thermostat or thermal cut-out, Failed grill relay on control PCB, Broken wiring to grill element

Safety: Unplug and allow the unit to cool before inspection.

Step 1 – Test grill mode: Run grill for a few minutes and check if the element glows red (visible on many models). If not, proceed to internal checks.
Step 2 – Inspect element and wiring: Remove the outer cabinet and check the grill element and its connections for breaks or burns.
Step 3 – Test continuity: Use a multimeter to test the grill element and thermostat. Replace any open components.

If the element and thermostat are good, the control PCB grill relay may be faulty.

Hard 4/5

Grill Heating Element

Check Price on Amazon

We may earn a commission from links on this page.