E13
Teka Motor Drive Circuit Fault

Microwave shows E13 when starting; interior light comes on but turntable and fan do not run.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Shorted turntable motor,Shorted fan motor,Blown internal line fuse,Defective motor drive relay on PCB

How to Fix / Troubleshooting

Safety: Unplug the unit before accessing the base or internal components.

Basic checks:

  • Remove the glass tray and roller ring; check for broken or jammed parts that could overload the motor.
  • Try starting the microwave briefly (if safe) without the tray to see if the motor attempts to turn.

Internal checks (technician):

  • Access the underside of the cavity to reach the turntable motor.
  • Test the motor for continuity and insulation; replace if shorted or open.
  • Inspect the fan motor similarly.
  • Check the main PCB for a blown track or relay damage in the motor drive section.

Note: Replace any shorted motor before replacing fuses or PCB to avoid repeat failure.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Turntable Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements