Whirlpool
Display / VFD / LED Module Failure
Microwave display is dim, flickering, or partially missing segments
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging VFD display, Weak display power supply on control board, Loose display connector, Failing LED module
How to Fix / Troubleshooting
Safety: Unplug the microwave before accessing the control panel.
- Check brightness settings: Some Whirlpool models allow dimming the display. Verify it is set to normal or high.
- Inspect connections: Remove the control panel and check the ribbon or harness between the display module and control board. Reseat connectors.
- Look for board damage: Examine the control board for burnt resistors or capacitors near the display driver circuit.
- Replace display/control: If the display remains dim or segments are missing, replace the display module or entire control board assembly, depending on design.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements