AEG
Temperature / Pressure Calibration Drift
Food is consistently undercooked or overcooked compared to selected program settings.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging NTC sensors, Incorrect inner pot type or thickness, Firmware calibration drift, Poor contact between pot and heater
How to Fix / Troubleshooting
Safety first: Unplug and cool the cooker before internal checks.
- Use original pot: Confirm you are using the original AEG inner pot. Non-original pots can alter heating characteristics.
- Clean contact surfaces: Remove any burnt-on residue from the heating plate and pot bottom.
- Compare with manual: Verify that you are using the correct program and liquid ratios as per the AEG recipe guide.
- Sensor check: If you have a multimeter, test the main NTC sensor resistance at room temperature. Replace if significantly off-spec.
- Service calibration: Persistent calibration issues may require firmware update or PCB replacement by an authorized AEG service center.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Temperature Sensor (NTC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements